Brother MFL-Pro Suite MFC-L2700DW series 1.0.2

To connect your printer to Wi-Fi, make sure your router is set up and your computer is connected to the network. Then, press the Menu button on your printer and navigate to the Network menu. Select WLAN and follow the on-screen prompts to enter your network name and password.

To replace the toner cartridge, open the front cover of the printer and pull out the drum unit. Press the lock lever to release the old toner cartridge and then remove it from the drum unit. Shake the new toner cartridge horizontally several times and then remove its protective cover. Insert the new toner cartridge firmly into the drum unit until it clicks into place.

You can use plain paper, thin paper, recycled paper, thick paper, bond paper, labels, envelopes, and more with your Brother MFC-L2700DW printer. Check your printer manual for specific paper size and weight requirements.

To scan a document, make sure your printer is turned on and connected to your computer. Place your document face down on the scanner glass or face up in the ADF (automatic document feeder). Press the Scan button on your printer or use the scanning software on your computer to initiate the scan. Follow the on-screen prompts to save or share your scanned document.

If your printer shows a paper jam error, start by turning off the machine and disconnecting it from the power source. Carefully remove any jammed paper from the printer, including torn pieces. Make sure there are no scraps of paper left inside the printer. Close all covers and trays and then reconnect the printer to power. Turn it back on and check to see if the error is cleared.

Yes, you can print directly from your mobile device using the Brother iPrint&Scan app. Download and install the app on your device and then select your printer from the list of available devices. Choose your print settings and then select Print to initiate the print job.

To perform a factory reset, turn off your printer and then press and hold the Go button as you turn the machine back on. Keep holding the button until all three LEDs are lit up and then release. Press the Go button six times to reset the printer to its factory settings.

To set up your printer to receive faxes, connect it to a phone line and configure your fax settings. Press the Menu button on your printer and navigate to Fax > Setup Receive > Easy Receive, and then select On. Follow the on-screen prompts to adjust your fax settings as needed.

If your printer is not printing, start by checking that it is turned on and connected properly to both power and your computer or network. Make sure you have selected it as your default printer and that there are no error messages showing on the device or your computer. Try restarting both your printer and your computer and then initiate a test print job.

You can find troubleshooting information and tips in your printer manual or on the Brother support website. Search for your specific printer model and browse the articles and forums for solutions to common issues.